Stucco repair is one of the important requirements in old houses. It is necessary to understand the process to get high quality in the repair work. A systematic approach is necessary to get good adherence and finish. Significant precaution should be observed in the process are as follows. Consult stucco repair in San Diego and get all the relevant information about stucco repair.
• Don’t apply the mixture to the wet surfaces.
• Use blender properly, and get the mixture to required smoothness and consistency.
• Apply preliminary coat within 90 minutes after mixing and blending the stucco mixture.
• Even application is necessary.
• The mixture creates heat, so to avoid burns it is necessary to wear gloves before applying the mixture on the intended surface.
• The coats when applied should be covered with plastic sheet to retain the wetness.
• Proper finishing is very important. Give as many coats as required to get proper finish and strength.
• Avoid spilling on your hands and other body parts as the alkalies present in the mixture cause burns. Keep a bucket of water near your work area, so that you can wash off immediately if anything spills. Use plenty of water to remove the mixture.
• Take care to see that the stucco do not dry very fast, slow curing is necessary. Apply water using a sponge and keep it wet. Slow curing increases the strength of the stucco.
• Finally, whatever finishing touch you wish to provide, make sure it can tolerate the alkaline. When it can tolerate the alkaline you will get fine finish and it will be durable.
No comments:
Post a Comment